Zalman CNPS9500 LED / CNPS9500-Cu LED Pure Copper Base CPU Cooler for Intel P4 Socket 478, Intel Dual Core P4 Socket 775, AMD Sempron, Athlon 64, Athlon 64 FX, Socket 754, 939, 940 (Retail) (Discontinued)

• 100% copper heatsink with aerodynamically optimized ¡°tunnel¡± design for maximum cooling
  efficiency.
• Innovative and patented, curved heatpipe design for a heat transfer capacity of up to 6 heatpipes
  with the use of just 3.
• Optimized heatsink layout for maximum cooling efficiency with minimal materials.
• 0.2mm ultra-slim fins for minimized weight and reduced airflow resistance.
• Ultra quiet CNPS 92mm opaque fan with blue LEDs.
• Aerodynamically optimized heatsink for smoother airflow and minimal noise.
• Compatible CPUs:
  - Intel : All Dual Core Pentium CPUs (Socket 775)
  All Pentium 4 CPUs (Socket 775/478)
  - AMD : All Dual Core AMD Athlon 64 X2 CPUs (Socket 939)
  All AMD Sempron/AMD64 CPUs (Socket 775/939/940)
• Adjustable fan speed controller (FAN MATE 2) enables control of noise and fan speed.

Common Components:

• CNPS9500
• Thermal Grease
• Fan Speed Controller (FAN MATE 2)
• Cable for FAN MATE 2
• Double-sided Tape (to attach FAN MATE 2)
• One(1) S-Type Clip (for installing Socket 775/478)
• One(1) L-Type Clip (for installing Socket
  754/939/940)
• Four(4) Bolts (for installing the Cooler)
• User¡¯s Manual

Components for Intel Pentium 4 (Socket 478):

• Two(2) Clip Supports for Socket 478
• Two(2) Install Bolts for Socket 478
• One(1) L-Wrench

Components for Intel Dual Core Pentium/Pentium 4 (Socket 775):

• Four(4) Clip Support Fixing Bolts for Socket 775
• One(1) Clip Support for Socket 775
• One(1) Backplate for Socket 775

Components for AMD Sempron/AMD64 (Socket 754/939/940):

• Two(2) Nipples (Motherboards with Pushpin-type Retention Frame need)

*Note:

• The maximum weight for a cooler is specified as 450g for Intel Socket 775 and AMD Socket 754/939/940. Special care should be taken when moving a computer equipped with a cooler that exceeds the specified weight limit. Zalman is not responsible for any damage that occurs when moving a computer.
• Fan rotates at 2,600rpm when directly connected to 3-pin header on motherboard, without using a FAN MATE 2.
• Zalman Tech is not responsible for any damages arising from using the product outside of its intended purpose.
• CPU and/or motherboard may become damaged if the product is incorrectly installed. Familiarize yourself with the ¡°Installation¡± steps before installing the product.

0.12 °C/W

HDMI Cables and Switches
Apogee HDMI 1.3b Cables and Switchers

Core i5 Quad
Intel LGA1156 Quad-Core 750, 660, 670, 650, 661

Hard Drive Docking Station
USB 2.0, SATA, Thermaltake, Vantec

Best Sellers