Mediagate MG-35 NDAS Network Direct Attached Storage/Write Key (Retail) (Discontinued)

How to update the firmware on the MG-35?
Connect the MG-35 to your computer using the USB cable, download the firmware upgrade from the manufacturer's website www.airlinktek.com under the "Support", or click here for Firmware Updrade v1.4.3
Connect the MG-35 to your TV, projector or anything that has the video input
Go into the "Movie" tab and select the downloaded file to update

When update complete, turn off the unit, wait for 10 seconds and then turn power back on. (Note: It is very important that you do not disrupt the power supply during the update. If for any reason, the power is interrupted, the unit will become defective)

How to get the MAC address from the MG-35?
Update firmware on the MG-35
Connect the MG-35 to your TV, projector or anything that has the video input
Go into the the "Setup Menu", select the "Network Icon". Now the MAC address of the MG-35 will be displayed on the screen

How to enable the LanShare function?
Connect the MG-35 to your TV, projector or anything that has the video input
Go into the the "Setup Menu", select the "Network Icon"
Enable the NDAS to utilize the LanShare function
Connect the MG-35 to your computer and enter the NDAS write key thru software. Click here to down load the free zip file that manage the NDAS. You can also use other software