Home > Networking > Wireless-N (draft 802.11n) Networking Gear > Cisco Linksys WAP4410N 802.11n Wireless-N Access Point w/ 4-Port Switch, PoE, Repeater, Bridge: WAP4410N (Retail)

Cisco Linksys WAP4410N 802.11n Wireless-N Access Point w/ 4-Port Switch, PoE, Repeater, Bridge: WAP4410N (Retail)

Features:

Access to the network has become a basic necessity for organizations of all sizes. Your employees depend on the network for important resources such as applications, programs and files and for communication with partners, customers and colleagues. When professionals conduct business away from their work space, they lose access to these valuable network resources. This impedes their ability to make decisions, to collaborate effectively in meetings, and to remain productive. You need a solution that provides the security and bandwidth you need with convenient network connectivity for your employees on the move.

The Linksys by Cisco WAP4410N is an 802.11n access point that provides secure, high performance network access, with expanded coverage, to extend your wired network to mobile employees within the workplace. It features:

802.11n standard and is backwards compatible with 802.11b and g devices, supports high bandwidth applications

MIMO technology increases wireless throughput and range and expands the range to reduce “dead spots” in the wireless coverage area

Enhanced security to protect business information:

Rogue AP detection notifies the administrator when an unauthorized AP is detected

Supports the industrial-strength wireless security of Wi-Fi Protected Access™ (WPA)

MAC address filter allows you to decide which users can access the wireless network, and advanced logging tracks when users enter the network

The WIFI Protected Setup (WPS) facilitates simple and secure deployment of security in the wireless network. Configuration is easy with the web browser-based configuration utility

Quality of service (QoS) for crisp voice and video communications

Easy installation and configuration via a Web interface

Connects to Power over Ethernet devices simplifying deployment and eliminating the need and cost of installing the external power supplies

The Linksys by Cisco Wireless-N Access Point with enhanced security is the best way to add wireless access to your existing business network to keep your employees productive and connected.

Product Specification:
Standards	Draft IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u, IEEE802.3af (Power Over Ethernet), 802.1x (Security Authentication), 802.11i Security WPA/WPA2, WMM
Ports	Ethernet, Power
Buttons	Reset
Cabling Type	UTP CAT 5e or higher
LEDs	Power, Ethernet, Wireless, PoE
Operating System	Linux
WebUI	Built-in Web UI for easy browser-based configuration (HTTP/HTTPS)
SNMP Version	SNMP Version 1, 2c
Web F/W Upgrade	Firmware upgradeable through Web-browser
Diags: Flash, etc.	Diags: Flash, RAM, LAN, WLAN
DHCP	DHCP client
HTTP Redirect	Redirects initial user access to an external Web Server to display company logo or network usage policy
IPv6 Host	Support for management and control of Access Point over IPv6. Supports RFC2460 (IPv6 protocol) and RFC4294 (IPv6 Node Requirements)
Multiple BSSID	Supports up to 4 BSSIDs, allowing the creating of multiple virtual Access Points
VLANs	Supports 802.1q —up to 4 VLANs
SSID to VLAN Mapping	Supports mapping of SSIDs to VLANs to securely separate workgroups across wireless and wired domains
Spanning Tree	Supports 802.1d Spanning Tree protocol to prevent loops when using WDS links as redundant links in a distribution system
Operating Modes	Access Point Mode, point-to-point Bridge Mode, point-to-multipoint Bridge Mode, Repeater Mode, Wireless Client Mode
Load Balancing	Allows the bandwidth control with user defined CPU usage ratio
Auto-channel Selection	On boot up, the AP selects the least congested channel
802.11d Regulatory Domain	Supports the AP to provide radio channel settings for client devices, facilitating easy client access as they move across regulatory domains
WEP/WPA/WPA2	WEP 64-Bit/128-Bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
Access Control	Wireless Connection Control: MAC-based
SSID Bradcast	SSID Broadcast Enable/Disable
Client Isolation	Supports wireless client isolation between and within SSIDs
802.1x	Wireless clients can be authenticated through IEEE 802.1X
802.1x Supplicant	Supports 802.1x Supplicant on the Ethernet port to allow the AP to authenticate itself to the network
Radius Server	Up to 2 Radius Servers can be configured for redundancy purposes
WPS	Supports WPS (Wifi Protected Setup), which is a WIFI Alliance specification for simple and secure setup of a wireless network
Warranty	http://www.xpcgear.com/warranty.html

Hot Items

USB / IDE to SATA Adapter!
USB 2.0 Hard Drive Cable

HDMI Cables and Switches
Apogee HDMI 1.3b Cables and Switchers

MG-M2TVD
MediaGate MG-M2TVD HDTV Media Player

Low Profile Video Cards
PCI Slot, AGP, PCI-Express

Core 2 Quad
Intel Quad-Core E8400; Dual- Core E7500

iPhone Car Kit
Universal iPhone iTouch Handsfree FM transmitter

Asus Motherboards
Complete Asus Motherboard Product Line

Hard Drive Docking Station
USB 2.0, SATA, Thermaltake, Vantec

Hard Drive Enclosure Case
SATA eSATA Portable
HDDs

Best Sellers	External Hard Drives	Memory	Software
Case Mod Supplies	Hard Drives	Memory Card Readers	Sound Cards
Computer Cases	SATA Round Cables	Motherboards	USB 2.0 Devices
CPU Cooling Fans	iPhone Accessories	HDMI Switchers	USB 2.0 Enclosures
CPUs/ Processors	Keyboards & Mice	Power Supplies	USB 2.0 Flash Drives
DVD Burners	LCD & HDTVs	SuperMicro Servers	Video Cards

All items are brand new and in stock (unless otherwise noted) and are normally shipped within 24 business hours. All product names, trademarks or registered trademarks referenced herein are the property of their respective companies. Copyright 2001 - 2009, eXtreme PC gear .com