Gigabyte GA-H67M-D2-B3 H67 DDR3 LGA1155 microATX Motherboard w/ DVI, VGA, CrossfireX, 2x PCI-Express X16, SATA 6G, GBLAN, USB 3.0: GA-H67M-D2-B3 (Discontinued)

1. Supports the newest LGA1155 2nd Generation Intel� Core� processors
2. All Japanese-made solid capacitors on board design
3. GIGABYTE 3x USB Power with On/Off Charge USB ports
4. High speed SATA3 storage interface with superfast 6Gbps link speed
5. CrossFireX support for ultimate graphics performance
6. DVI interface for smoother HD video playback
7. Innovative Smart 6 technology for smarter PC management
8. Patented DualBIOS� technology delivering highest level failure protection

1. Support for Intel� Core� i7 processors/Intel� Core� i5 processors/ Intel� Core� i3 processors/Intel� Pentium� processors/Intel� Celeron� processors in the LGA1155 package (Go to GIGABYTE's website for the latest CPU support list.)
2. L3 cache varies with CPU

1. 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
   * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
2. Dual channel memory architecture
3. Support for DDR3 1333/1066/800 MHz memory modules
4. Support for non-ECC memory modules

IIntegrated in the Chipset:

1. 1 x DVI-D port
2. 1 x D-Sub port

1. Realtek ALC888B codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
   * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.

1 x Realtek RTL8111E chip (10/100/1000 Mbit)

1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)
   * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
2. 1 x PCI Express x16 slot, running at x4 (PCIEX4)
3. 2 x PCI Express x1 slots
   (All PCI Express slots conform to PCI Express 2.0 standard.)

Chipset:

1. 2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA 6Gb/s devices
2. 4 x SATA 3Gb/s connectors (SATA2_2~SATA2_5) supporting up to 4 SATA 3Gb/s devices
3. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
   * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.

Chipset:

1. Up to 14 USB 2.0/1.1 ports (8 on the back panel, 6 via the USB brackets connected to the internal USB headers)

1. 1 x 24-pin ATX main power connector
2. 1 x 4-pin ATX 12V power connector
3. 2 x SATA 6Gb/s connectors
4. 4 x SATA 3Gb/s connectors
5. 1 x CPU fan header
6. 1 x system fan header
7. 1 x front panel header
8. 1 x front panel audio header
9. 3 x USB 2.0/1.1 headers
10. 2 x serial port headers
11. 1 x clearing CMOS jumper

1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x D-Sub port
4. 1 x DVI-D port
5. 8 x USB 2.0/1.1 ports
6. 1 x RJ-45 port
7. 3 x audio jacks (Line In/Line Out/Microphone)

Micro ATX Form Factor; 24.4cm x 21.0cm

HDMI Cables and Switches
Apogee HDMI 1.3b Cables and Switchers

Core LGA1155
Intel LGA1155 Quad-Core CPUs Motherboards

Hard Drive Docking Station
USB 2.0, SATA, Thermaltake, Vantec

Best Sellers