Cool Laboratory Liquid Pro Liquid Metal Thermal Interface Material (0.15ml) (Item NOT Intended for Aluminum Coolers) (Discontinued)

Cool Laboratory Liquid Pro is the first heat thermal conductive compound which truly earns this title. Cool Laboratory Liquid Pro consists of 100% liquid metal! It is liquid at ambient temperature (very cool!). CoolLaboratory has a heat transfer rate over eight times that of conventional thermal compounds.

CoolLaboratory Liquid Pro does not contain any non-metallic additives such as Silicone, of oxides, etc.. Due to this composition (completely new for thermal compounds) it exceeds the best past thermal compounds in the heat conductance around the factor 9-10, simpler thermal compounds around the factor 100.

The Liquid Pro works like liquid tin solder. With a small lint free brush the liquid metal is then distributed evenly thinly on the processor. After the cooler is installed and the paste ran 48 hours, the liquid metal solidifies itself and achieves its optimal cooling performance.

When applying Liquid Metal, a little more care is necessary compared to the application of conventional pastes. If you are inexperienced in dealing with computer hardware you may wish to pick another paste that has less performance and less potential risks.

Amount: 0.15ml

• Made of true liquid metal
• Non Toxic
• VERY High Heat Conductivity
• 100% liquid metal!

To ensure Optimum Results applying Liquid Pro, please note the following:
1) Cool Laboratory Liquid Pro was designed for use with high quality coolers made of copper or silver. Aluminum coolers are NOT suitable for use with Liquid Pro.

Note* DO NOT USE ALUMINUM COOLERS, or allow Liquid Pro to come in contact with any aluminum surfaces. Aluminum is not resistant against Liquid Pro and will result in damages to any aluminum surface.

2)Like all metals, Liquid Pro may act as an electrical conductor. This forms no problem if applied according to the directions provided, as your cooler is a conductive metal as well. Make sure Liquid Pro Does not touch any electric components. This could lead to short circuit when power is on. If you spill some of the Liquid Pro, wipe it away thoroughly before turning your PC on. Larger quantities can be sucked away with the syringe, or use a paper towel for smaller amounts.

Note* Even non-electricity conducting heat conducting pastes may acquire electric conductibility after some time. The reason is possible contamination with dust and metal particles by the cooling fan.

Please read all instructions included with Liquid Pro before applying.

Download Safety Sheet for CoolLaboratory Liquid Pro

*CAUTION* due to its liquid metal properties Liquid Pro has been packaged in a syringe and can only be sold to those above the age of 18. User is responsible for disposal of used Liquid Pro container in accordance to local laws.

HDMI Cables and Switches
Apogee HDMI 1.3b Cables and Switchers

Core i5 Quad
Intel LGA1156 Quad-Core 750, 660, 670, 650, 661

Hard Drive Docking Station
USB 2.0, SATA, Thermaltake, Vantec

Best Sellers