|
Unique 2-Step Process
ArctiClean 1 Thermal Material Remover quickly emulsifies and dissolves
the existing thermal grease or pad from the CPU and/or heatsink
so that it can easily be removed with a clean cloth or paper towel.
A few drops of ArctiClean 2 Thermal Surface Purifier and some gentle
wiping then removes the remaining residue and inhibits flash corrosion
on copper or aluminum.
ArctiClean 1 Thermal Material Remover
ArctiClean 1 uses a proprietary combination of non-toxic biodegradable
solvents to emulsify thermal greases or thermal pads. The citrus
and soy based solvents in ArctiClean 1 match or exceed many hazardous
and volatile solvents such as fluorinated and chlorinated organic
solvents, acetone, MEK (methyl ethyl ketone), mineral spirits, isopropyl
alcohol, and toluene.
ArctiClean 2 Thermal Surface Purifier
The cationic surfactants in ArctiClean 2 remove any residue left
by the ArctiClean 1 leaving a pristine surface for the application
of a new thermal interface material. It also incorporates advanced
flash corrosion inhibitors that minimize the corrosion layer on
copper and aluminum allowing for more intimate contact between the
thermal interface material and the heatsink.
Using ArctiClean 2 With Other Solvents
Most solvents and cleaning products leave residue on the CPU and
heatsink that negatively affects the performance of any subsequently
applied thermal interface material. ArctiClean 2 Thermal Surface
Purifier removes the residue of citrus or petroleum based cleaners
and inhibits flash corrosion on a copper or aluminum heatsink.
|
